Drunen,,The,Netherlands,-,April,29,,2020:,Whirlpool,Combi,Oven

How to Remove & Replace Whirlpool Fridge Water Filters

Changing your Whirlpool water filter is a quick and easy way to keep you and your family hydrated and healthy. Water filters are crucial for keeping out impurities that can cause illness from your drinking water.

Changing your Whirlpool water filter is quick, simple, and only takes a few minutes.

Simply remove the old filter by pushing or twisting it out of the compartment, insert the new water filter and lock it into place, shut the compartment, and flush the filter. You can see just how simple it is to change your Whirlpool water filter!

Staying up to date with changing your water filter every six months will keep your refrigerator’s water dispenser and ice maker running smoothly.

How do you know when it’s time to replace your water filter? You’ll start to notice a bad smell or taste to the water, and your refrigerator’s indicator light will turn red.

Remove & Replace Whirlpool Fridge Water Filters

A Whirlpool refrigerator water filter can provide you with fresh, clean drinking water. But those filters aren’t designed to work forever.  

How can you tell when it’s time to replace your Whirlpool water filter? You’ll typically notice a bad taste or smell from the water.

You might also be wondering how to change Whirlpool water filter, and that’s where this article comes in. Keep reading to learn how to change Whirlpool water filter.

Is Tap Water Safe?

Some of the safest tap water can be found in the United States because the United States Environmental Protection Agency regulates community water systems.

However, the condition of your tap water can vary depending on:

  • Plumbing systems
  • Local water sources
  • Other environmental factors that can lead to contaminants being found in your tap water

Water filters are used to reduce the number of impurities and contaminants inside your tap water to ensure that the quality is good and to improve the taste and odor of tap water.

Some people will choose to filter their tap water because of concerns about contaminants in their local water. Or, they simply prefer the taste of filtered water.

Why Are Refrigerator Water Filters So Important?

Replacing your water filter regularly is crucial to maintaining the effectiveness of your refrigerator’s water dispenser and reducing any bacterial contamination.

An out-of-date and overused water filter can be dangerous. This is because the filter is no longer trapping contaminants, which allows them into your drinking water.

So, for the safety of you and your loved ones, it’s important to replace your water filter when it’s time.

Rehydrate and refresh.

What Is My Water Filter Doing?

Water filters do more than just make your water taste and look good; they can also remove several contaminants that can cause illness.

Some water filters can filter out over 66 different contaminants, including:

  • Industrial chemicals
  • Asbestos
  • Pesticides
  • Mercury
  • Lead
  • Waterborne parasites
  • Pharmaceuticals.

Drinking water that your Whirlpool refrigerator has filtered will help keep you and your family hydrated and healthy.

Do I Have to Replace My Whirlpool Water Filter?

Replacing your Whirlpool water filter is the only way to ensure that you’re getting fresh, clean drinking water from your refrigerator.

With continued use, the contaminants and particles that your water filter filters out will start to clog the filter, making it incapable of doing its job.

What this means is that those impurities won’t get filtered out and will stay in your water. These impurities can lead to illness if you aren’t careful.

How Do I Know When It’s Time to Change My Water Filter?

There are a few signs that you might notice when it’s time for you to replace your Whirlpool water filter.

  • Water pressure isn’t what it’s supposed to be when dispensing water
  • Your ice maker starts making smaller pieces of ice
  • Your filtered water smells weird
  • The water has a bad taste

If you start to notice any of these signs, it’s time to replace your Whirlpool water filter. You can also tell if it’s time to replace your water filter because of the indicator light on your refrigerator. Once that light turns red, it’s time to replace your water filter.

When Should I Be Replacing My Water Filter?

Replacing your Whirlpool water filter every six months should help prevent any bad smelling or tasting water and prevent pressure issues.

But how often you should be changing your water filter will depend on the flow rate and how often you’re using it. Faster flow rates and constant use can require more frequent changes.

How to Change Whirlpool Water Filter

Whirlpool water filters for refrigerators are typically located behind the base grille or in the top right corner of the inside of the refrigerator. Some filters can be twisted to remove and replace, while others can be push-In models.

Check the use and care manual that came with your refrigerator to figure out where your water filter is and the right filter model for your refrigerator.

How to change Whirlpool water filter in eight steps:

  1. Find the water filter. In most Whirlpool refrigerators, they’re located behind the base grille or in the top right corner on the inside of the refrigerator.
  2. Open the cover or compartment. This can be done by lifting the door to the compartment or pulling the compartment door down. The base grille filter can have a button that ejects the filter so you can easily grab it.
  3. Remove the old water filter and throw it away. To do this, you’ll either have to pull the filter right out of the compartment or twist the filter counterclockwise, depending on your refrigerator’s model.
  4. Open your new water filter. If the new filter has O-rings, you need to get rid of the protective covering but make sure that those O-rings stay in place.
  5. Put the new filter into the compartment, making sure that any grooves or arrows are aligned properly.
  6. Lock the filter in place. Some filters need to be twisted clockwise until they’re secured, while others only need to be pushed into place.
  7. Close the compartment door, ensuring that they snap into place to keep your new filter clean and secure from debris.
  8. Flush the filter by dispensing and disposing of four gallons of water to flush out the waterline to remove any remaining contaminants.

For more information on how to change Whirlpool water filter, check out this video on the process.

What Happens if My Water Filter Gets Stuck?

When this occurs, the first thing you should do is check the user manual to make sure that you followed the right changing instructions. If the filter stays stuck, there are specific things that you can do for both interior and base grille filters.

Here are some troubleshooting tips when your interior filter is stuck:

  • Ensure that the door to the water filter compartment is fully opened; this is to make sure that you have room to take the water filter out. You might have to take a refrigerator shelf out to let the compartment door open fully.
  • Your water filter could be stuck because of a buildup of pressure in the waterline. Decrease the pressure in the waterline by turning off the water to the refrigerator and getting rid of any water that gets dispensed out of the refrigerator.

Here’s how to troubleshoot a stuck base grille water filter:

  • Make sure all the eject buttons are pushed all the way in to help disengage the water filter.
  • For twist models, cover the filter cap with a cloth and use fliers to give the cap a one-quarter turn.

Does My Water Filter Clean Itself After I Reset the Indicator Light?

Your Whirlpool water filter isn’t self-cleaning. So, resetting the refrigerator’s indicator light won’t reset the filter or clean it. Only physically replacing your water filter will ensure that you’re getting clean water every time you use your refrigerator’s water dispenser.

Where Can I Buy Replacement Water Filters?

Most water filters can be found at big box stores, so you don’t have to purchase them directly from the manufacturer if you don’t want to. Since remembering to buy a new water filter every six months can be a hassle and can be easily forgotten, ordering online can be convenient.

You can even sign up for a subscription that will auto-ship a new water filter to you every six, 12, or 18 months.

How Do I Know What Water Filter I Need?

If you don’t have your user manual anymore that tells you what kind of water filter you need; there’s an easy solution. Check out this website designed for Whirlpool refrigerators to figure out what filter your specific refrigerator requires.

Whirlpool uses Everydrop filters labeled Ice and Water Refrigerator Filter 1-6. Each filter works on different models of Whirlpool refrigerators.

Refrigerator Filter 1 and 2 are NSF certified to reduce 28 contaminants, including pharmaceuticals, pesticides, and lead. Refrigerator Filter 3 is NSF certified to reduce 73 contaminants,Refrigerator Filter 4 is NSF certified to reduce 31 contaminants, Refrigerator Filter 5 is NSF certified to reduce 27 contaminants, and Refrigerator Filter 6 is NSF certified to reduce nine contaminants.

All six water filters work to replace 1500 plastic water bottles and work great for Whirlpool refrigerators.

How to Reset the Water Filter Indicator Light

Find the water filter button on your refrigerator; this is the button you need to reset the light. This button is typically found below or above the water indicator light. In some Whirlpool refrigerators, the button is found on the inside.

  • If you own a side-by-side refrigerator, the button is located above the water tap outside the refrigerator.
  • The filter light and reset button can be found on the inside of the French Door Whirlpool refrigerators on the top right.
  • Bottom mount French door refrigerators use different buttons to reset the indicator light. Find these on the touchpad inside the refrigerator.

Press and hold the button for three seconds to reset the light. It will either beep at your, or the indicator light will turn from orange to blue.

Final Thoughts

The only way to fight harmful contaminants in your drinking water is to take care of your refrigerator’s water filter. The good news is that Whirlpool water filters are quick and easy to replace when they go bad.

You’ll know that your Whirlpool water filter is ready to be replaced because the water pressure won’t be great for the water dispenser, ice cubes will start to be smaller,you might notice a bad smell or taste in the water, and the indicator light might turn red. If any of these things happen, it’s time to replace your water filter as soon as possible.

Water filters for your Whirlpool refrigerator are cheap and can increase the quality of your water. If you take good care of the filter, your entire household can enjoy clean and fresh water right from your home.

Knowing which water filter is right for your refrigerator means looking at the user manual or searching online to see what your model takes.

But making sure that you use Everydrop water filters in your Whirlpool refrigerator will ensure that your water will be healthy and taste great.

Hopefully, from this article, you’ve learned about how to change Whirlpool water filter and about why water filters are so important.

You can see from reading this article that it doesn’t require a professional to replace water filters in your Whirlpool refrigerator. So, what’s stopping you from changing yours?

Click to rate this post!
[Total: 1 Average: 5]
In

Amanda Perkins

Amanda began her career as a technical writer for a healthcare group in 2008. Years after getting married and starting a family, she joined her husband Joshua on the Water Filter Authority journey to educate other families and households about safe, affordable, and effective water filtration systems.